Deseeding, Stalks Grinder, Microfiltration
Vibrating Deseeding Table ""Vs""
 |
For the deseeding and must cleaning at the end of the vilification. Built in stainless steel AISI 304, on wheels, vibrating motor. Fittings Garolla 60mm without hose fitting. Tension/Frequency V400 - Hz50 Ph 3.
| Description |
Technical Data |
Electrical Data |
Dimensions |
Weight |
- VS 2 Performance from 15 to 30 T/h with fermented mass, Seeds extraction performance 0,5-1 T/h (pump over)
|
-- |
0,45 kW |
1050x1500x1200 |
-- |
- VS 4 Performance from 20 to 40 T/h with fermented mass, Seeds extraction performance 0,8-1,8 T/h (pump over)
|
-- |
0,45 kW |
1100x1600x1200 |
-- |
|
| |
Optional:
- Extra Charge For Special Fittings (Din, Macon, ….) - Standard Garolla
- Hose Fitting On Request (See Appendix)
- Extra Charge For Special Tension/Frequency
- Extra Charge For Non Ispm15 Timber Pallet + Nylon Thermo Covering
|
Stalks Grinder Made Of Stainless-Steel
 |
Stainless-steel execution, with fixed and mobile blades, without electric control panel. Tension/Frequency V400 - Hz50 Ph 3.
| Description |
Technical Data |
Electrical Data |
Dimensions |
Weight |
- Model for 50 Ton/h destemmer
|
-- |
4 kW |
-- |
-- |
- Model for 100 Ton/h destemmer
|
-- |
7,5 kW |
-- |
-- |
- Model for 200 Ton/h destemmer
|
-- |
11 kW |
-- |
-- |
- Model for 300 Ton/h destemmer
|
-- |
15 kW |
-- |
-- |
|
Microfiltration
 |
Base and bell in stainless steel aisi 316L, for cartridges 750 mm 30", fittings DIN, piping, valves, manometer and stainless steel feet, sampler, breather, valves, internal/external finishing. (cartridges excluded). Without hose fitting. Tension/Frequency V400 - Hz50 Ph 3.
| Description |
Technical Data |
Electrical Data |
Dimensions |
Weight |
- MFH 1 1 Housing for 1 Cartridge - DIN 25 mm Performance 1000 l/h
|
-- |
700x450x1550 |
-- |
-- |
- MFH 3 1 Housing for 3 Cartridges - DIN 40 mm Performance 3000 l/h
|
-- |
1000x450x1550 |
-- |
-- |
- MFH 5 1 Housing for 5 Cartridges - DIN 40 mm Performance 5000 l/h
|
-- |
1000x450x1550 |
-- |
-- |
- MFH 8 1 Housing for 8 Cartridges - DIN 50 mm Performance 8000 l/h
|
-- |
1000x450x1550 |
-- |
-- |
- MFH 12 1 Housing for 12 Cartridges - DIN 50 mm Performance 12000 l/h
|
-- |
1000x450x1550 |
-- |
-- |
|
| |
Optional:
- BY-PASS for Housing MFH 1
- BY-PASS for Housing MFH 3 - MFH 5
- BY-PASS for Housing MFH 8 - MFH 12
- Supporting frame for 2 housings
- Supporting frame for 3 housings
- Supporting frame for 4 housings
- Mohno feeding pump
- Extra charge for special fittings (Garolla, Macon, ….) fitting up kit. - Standard Din
- Hose fitting on request (See appendix)
- Extra charge for special tension/frequency
- Machine testing and start up
|
